CLIE Remote Commander setup
Assigning devices to the CLIE Remote Commander
To assign devices to your CLIÉ(TM) handheld, first check “Manufacturing companies supported by the CLIE Remote Commander application” to see whether the manufacturer of your remote-controlled device is supported by the CLIE Remote Commander application. Mode 1 for Sony products is selected for remote control setting by default.
You can assign up to four frequently used devices to the quick-start button to display control screen speedily. (See step 3 for details.)

1
On the CLIE Launcher screen, rotate the Jog Dial(TM) navigator to select CLIE RMC and press the Jog Dial(TM) navigator .
Or, tap the CLIE RMC icon on the CLIE Launcher screen.
The CLIE Remote Commander application starts and a list of the pre-assigned device is displayed.
2
Tap New.
The New Entry screen is displayed.
3
Tap the arrow next to the following items and select the appropriate settings for your device(s).
• Category: Select the device you want to remote-control. Select from TV, VCR, DVD, AV-AMP (amplifier).
• Maker: Select the manufacturing company of the remote-controlled device from the drop-down list.
• Mode: Select the remote control mode from the drop-down list (different models may require a different mode in order to operate).
• Button: Select which quick-start button you wish to assign the device to. Choose the letter from the drop-down list, or select none.
4
Point the infrared communications port of the CLIÉ(TM) handheld toward the device you want to remote-control and tap Test (power on/off).
If the device does not respond to the CLIE Remote Commander, select a different mode type in step 3.
5
In the Name box, enter a name for this remote control setting (for example, TV in the den).
6
Tap OK.
A confirm dialog box appears.
7
Tap OK.
The remote control setting is assigned to the selected quick-start button, and the control screen for the assigned device appears.


Example of the DVD remote

8 To assign more devices to the other quick-start buttons, tap Select on the control screen and repeat steps 2 to 7.
Note
Even if the manufacturer of the device is listed on the supported manufacturer list, some devices cannot be remote-controlled depending on its model or the year of its production.
Changing the remote control setting
1 Tap Menu on the control screen of the device you wish to change the settings.
2
Tap Details from the Options menu.
The Details screen appears.



3
Make changes as necessary and tap OK.
The CLIE RMC dialog box appears.
4
Tap OK.
The new remote control setting is set, and the control screen for the assigned device appears.
Deleting a remote control setting
Tap Delete in step 3 of “Changing the remote control setting” and tap OK.
Assigning operations to the application buttons and Jog Dial(TM) navigator
You can assign operations to the Jog Dial(TM) navigator or to the application buttons on the front panel. This is convenient for those operations you perform most (for example, adjusting the TV volume), since you do not even have to take out the stylus to operate.
1
On the CLIE Launcher screen, rotate the Jog Dial(TM) navigator to select CLIE RMC and then press the Jog Dial(TM) navigator .
Or, tap the CLIE RMC icon on the CLIE Launcher screen. The CLIE Remote Commander application starts and the control screen of the last used device is displayed.
2
Tap Menu , Options, then Key Assignment.
The Key Assignment screen appears.
3
If the check box for Use Key Assignment at the bottom right corner is not selected, tap to select it.
If the check box is unmarked, application buttons and Jog Dial(TM) navigator cannot be used in the CLIE Remote Commander application even if operations are assigned to them.
4
Tap the box next to each assignable button (for example, JOG Up).
The Key Assignment dialog box for each button appears.
5 Tap the arrow next to Entry, and select the name of the remote control setting you wish to assign to the key.
6
Tap the arrow next to Function, and select the operation you want to assign to that button.
7
Tap OK.
8
Repeat steps 5 to 8 until you have finished setting all the functions that you want.
9
Tap OK.