Controlling a digital still camera

Capturing still images

You can view images transferred from a Bluetooth(TM) BIP compatible digital still camera via Bluetooth(TM) and capture images from your CLIÉ(TM) handheld by remote.

1	Start the Remote Camera application and connect your CLIÉ(TM) handheld to the digital still camera via Bluetooth(TM). For details, refer to “Making a Bluetooth(TM) connection”.
2	Tap REMOTE CAPTURE to capture a still image. Or, press the Jog Dial(TM) navigator . A capture sound is heard, and the captured still image is recorded to the “Memory Stick(TM)” media in the digital still camera. The three most recently captured images are displayed on the right-hand side of the screen. When a new still image is captured, the older images scroll down and the most recently captured still image appears at the top.

Start the Remote Camera application and connect your CLIÉ(TM) handheld to the digital still camera via Bluetooth(TM).

For details, refer to “Making a Bluetooth(TM) connection”.

Tap REMOTE CAPTURE to capture a still image.

Or, press the Jog Dial(TM) navigator .
A capture sound is heard, and the captured still image is recorded to the “Memory Stick(TM)” media in the digital still camera.
The three most recently captured images are displayed on the right-hand side of the screen.
When a new still image is captured, the older images scroll down and the most recently captured still image appears at the top.

Note

The captured still images are recorded to the “Memory Stick(TM)” media inserted into the connected digital still camera. They will not be recorded to your CLIÉ(TM) handheld or a “Memory Stick(TM)” media inserted into your CLIÉ(TM) handheld.

Capturing still images by detecting movement

Remote Camera application can detect motion and capture it automatically.

	Tap the CLIP MOTION button. Clip motion mode starts. The image is automatically captured when a movement is detected on the connected digital still camera.

To turn off the CLIP Motion mode

Tap the CLIP MOTION button again and select OFF.

Note

The image will not be captured at the exact moment the movement is detected.