Recording still images

Notes

•	You cannot record an image if the battery is low. In this case, use the battery adaptor or fully recharge the battery.
•	Hold your CLIÉ™ handheld to prevent camera shake, or place your CLIÉ™ handheld on the stable position and use the self-timer.
•	Open the lens cover before you use CLIE Camera.
•	Be sure to close the lens cover after you use CLIE Camera.

1	Tap Applications tab, and tap the CLIE Camera application icon from the Applications screen. Note A fluorescent light may cause some flicker in the display. In this case, change the settings in Flicker Control.
2	Adjust the screen position, and aim the lens at the subject of your photograph.
3	Press the CAPTURE button on your CLIÉ™ handheld to record an image, or tap CAPTURE button on the screen. You can also press the Jog Dial™ navigator of your CLIÉ™ handheld to record images. The captured images will be saved on your CLIÉ™ handheld or the "Memory Stick™" media depending on the setting you have made in the Camera preferences. On storing images When you save data on "Memory Stick™" media, the recorded images are stored in the \DCIM\*MSDCF folder (“*” are numbers from 101 to 999) in the media. For specific location of the folder, see About files stored on “Memory Stick™” media.
4	Close the lens cover.

Using the self-timer function, you can capture a still image 10 seconds after pressing the CAPTURE button on your CLIÉ™ handheld

1	Tap (Timer). The timer button lights orange.
2	Press the CAPTURE button on your CLIÉ™ handheld, or tap CAPTURE button on the screen. Recording starts in 10 seconds.

Using the zoom function, you can capture a closer image of the subject of your photograph.

Tap

(Zoom) and select the desired zoom level from x 1 or x 2.

The image is recorded in the selected zoom level.

Note

The resolution of the image gets lower when you use zoom (x 2) function.