The thumbnails of the three latest images appear.
Managing recorded images | ![]() |
1 |
Tap
![]() The thumbnails of the three latest images appear.
![]() |
---|
2 |
Tap the thumbnail to select the image.
|
---|---|
3 |
Tap
![]() The information on the image appears on the screen.
|
1 |
Tap
![]() The thumbnails of the three latest images appear.
|
---|---|
2 |
Tap the thumbnail to select the image.
|
3 |
Tap
![]() The rotated image is displayed.
|
1 |
Tap
![]() The thumbnails of the three latest images appear.
|
---|---|
2 |
Tap the thumbnail to select the image.
|
3 |
Tap
![]() The confirmation dialog box appears.
|
4 |
Tap OK.
The selected image is deleted.
|
1 |
Prepare the receiving and sending CLIÉ™ handhelds for beaming.
See Handbook supplied to your CLIÉ™ handheld for details.
|
---|---|
2 |
Point the infrared communications ports of the CLIÉ™ handhelds toward each other.
|
3 |
Tap the thumbnail to select the image that you want to beam to another CLIÉ™ handheld.
|
4 |
Tap
![]() The image file is beamed to another CLIÉ™ handheld.
|
1 |
Prepare the receiving and the sending CLIÉ™ handhelds for Bluetooth® wireless technology communication.
Make sure that the Bluetooth® wireless technology is enabled in the Bluetooth® screen of the Preferences menu.
To use the Bluetooth® wireless technology on your CLIÉ™ handheld, refer to the Handbook supplied with your CLIÉ™ handheld.
|
---|---|
2 |
Tap Applications tab, and tap the CLIE Camera application icon from the Applications screen on the sending CLIÉ™ handheld.
|
3 |
Tap
![]() The thumbnails of the three latest images appear.
|
4 |
Tap the thumbnail to select the image.
|
5 |
Tap
![]() |
6 |
Tap Send.
The pop-up menu appears.
|
7 |
Select Send.
The Send With dialog box appears.
![]() |
8 |
Select Bluetooth and then tap OK.
|
9 |
Your CLIÉ™ handheld starts searching for a Bluetooth® wireless technology compatible devices when connected devices are found.
The Discovery Results screen appears.
![]() |
10 |
Tap the check box for the device to connect to, then tap OK.
|
1 |
Tap
![]() |
---|---|
2 |
Tap the thumbnail to select the image that you want to attach to an e-mail.
|
3 |
Tap
![]() The CLIE Mail application starts and Send with CLIE Mail screen is displayed with the selected image attached.
For details on the CLIE Mail application, refer to the CLIE Mail application manual.
|