See "Creating a new Address Book entry" for details.
| Exchanging business card |  |
You can choose and define an Address Book entry as a business card, and send it to other CLIÉ™ handhelds via the infrared communications port.
| 1 |
Create an address entry for yourself.
|
|---|---|
| 2 |
On the Address screen, tap and select your address entry.
The Address View screen appears.
 |
| 3 |
Tap Menu
 , Record, and then Select Business Card.The Select Business Card dialog box appears.
|
| 4 |
Tap Yes.
The business card icon is displayed on the screen.
 |
| 5 |
Prepare the receiving and sending CLIÉ™ handhelds for beaming.
Make sure that the Beam Receive is set to on in the Preferences screen.
Refer to the Handbook supplied with your CLIÉ™ handheld for details.
|
| 6 |
Point the infrared communications ports of the CLIÉ™ handhelds toward each other.
For best results, the sending and the receiving CLIÉ™ handhelds should be 4 to 8 inches (approximately 10 to 20 centimeters) apart.
|
| 7 |
Tap Menu
, Record, and then select Beam Business Card to send your business card via the infrared communications port. Or, press and hold down the Address Book icon for more than 2 seconds.
If your business card has an image file attached, the Beam Business Card dialog box appears.
|
| 8 |
Select to send business card with or without the image attached, and then tap Send.
|
On exchangeable business cards
You can exchange business cards with Palm OS®-based devices. However, you cannot send image file attached to the business card if the receiving device is a Palm OS® 4.x (or lower)-based CLIÉ™ handhelds or other Palm OS®-based device.