Hold your CLIÉ handheld firmly to prevent camera shake. Or place your CLIÉ handheld on a stable position and use the self-timer.
| Recording still images |  |
Note
Recording still images
| 1 |
Rotate the Jog Dial™ navigator on the CLIE Launcher screen to select CLIE Camera and then press the Jog Dial™ navigator, or tap the CLIE Camera icon on the CLIE Launcher screen.
The CLIE Camera application starts.
Note
A fluorescent light may cause some flicker in the display. In this case, change the settings in Flicker Control.
|
||||
|---|---|---|---|---|---|
| 2 |
Adjust the screen position, and aim the lens at the subject of your photograph.
|
||||
| 3 |
Press the CAPTURE button on your CLIÉ handheld to record an image, or tap CAPTURE button on the screen.
You can also press the Jog Dial™ navigator of your CLIÉ handheld to record images.
The captured images will be saved on your CLIÉ handheld or the "Memory Stick™" media depending on the setting you have made in the Camera preferences.
|
On storing images
When you have selected "Memory Stick™" media, the recorded images are stored in the \DCIM\***MSDCF folder (“***” are numbers from 101 to 999) in the media. For specific location of the folder, see “About files stored on “Memory Stick™” media.”
Using the self-timer
Using the self-timer function, you can capture a still image 10 seconds after pressing the CAPTURE button on your CLIÉ handheld
| 1 |
Tap
 (Timer).The timer button lights orange.
 |
|---|---|
| 2 |
Press the CAPTURE button on your CLIÉ handheld, or tap CAPTURE button on the screen.
Recording starts in 10 seconds.
|
Using the zoom function
Using the zoom function, you can capture a closer image of the subject of your photograph.
Tap 
(Zoom) and select the desired zoom level from x 1 or x 2.
(Zoom) and select the desired zoom level from x 1 or x 2.The image is recorded in the selected zoom level.
Note
The resolution of the image gets lower when you use zoom (x 2) function.