Playing audio files on your CLIÉ™ handheld

Connecting/attaching the headphones

Connect the headphones (sold separately) to the headphones jack of your CLIÉ™ handheld.

Notes

•	If you connect the headphones to your CLIÉ™ handheld, you will hear the tapping sounds or the beep of the CLIÉ™ handheld through them as well. The tapping sounds will be silenced altogether while the Audio Player application is running.
•	Put the headphone with the “R” mark on your right ear and the headphone with the “L” mark on your left ear.

Playing audio files

You can play audio files using the Audio Player application.
You can also play music in the background while you are using other applications. Tap Menu

, Options, Preferences, then tap and select the check box, then tap and select the Enable background play check box.
Charge the battery before starting playback.

Notes

•	While you are playing audio files stored on a “Memory Stick™ ” media, never remove the “Memory Stick™ ” media from your CLIÉ™ handheld. Doing so may damage the data or cause a malfunction.
•	The automatic shutoff of the CLIÉ™ handheld does not function during playback.
•	If the battery power level runs low, playback stops automatically. You can still use other applications such as Memo Pad or Address Book with the battery left in your CLIÉ™ handheld, but it is recommended to get the battery charged before it becomes completely empty.
•	If playback does not start, make sure that the POWER/HOLD switch on your CLIÉ™ handheld is set to the release position.
•	The command tools cannot be displayed during playback. They can only be displayed in stop mode.

Make sure that the write-protect tab is not set to LOCK position when you play audio files using a “Memory Stick™ ” media.

Connect the headphones to the headphones jack of your CLIÉ™ handheld when you listen to audio files with headphones.

On the CLIE 3D Launcher screen, rotate the Jog Dial™ navigator to select Audio Player and then press the Jog Dial™ navigator, or tap the Audio Player icon on the CLIE 3D Launcher screen.

Notes

•	The Audio Player application starts and then reads the TOC information such as the song name and artist name of the songs in the storage media. This may take several seconds.
•	Do not remove the “Memory Stick™ ” media at this time. If you do so, the audio data may be damaged and a malfunction may occur.

Tap

On the Normal View screen and the List View screen, playback also starts by pressing the Jog Dial™ navigator. Playback starts from the first song.
The track information appears during playback.

Playback stops automatically when all songs in the playlist are played back.

To stop playback

Tap

or press the Jog Dial™ navigator .

On other operations

Pause	Tap .
Go to the beginning of the current track	Tap .
Go to previous tracks	Tap repeatedly.
Go to the beginning of the next track	Tap .
Go to the beginning of succeeding tracks	Tap repeatedly.
Go backward	Tap continuously.
Go forward	Tap continuously.

Adjusting the volume

You can adjust the volume in following ways:

•	Tap or .
•	Tap and drag on the volume slider .
•	Rotate the Jog Dial navigator upwards or downwards.
•	Tap the scroll button on the Status bar.
•	Tap the on the Status bar, and then adjust the volume on the Adjust Volume screen.

Turning on Mega Bass

When you turn Mega Bass on, lower frequency signals are boosted for a more clear and powerful bass sound.
To turn the Mega Bass on, tap

. The level changes as you tap on the button from

(Low),

(Medium),

(High), and

(Off).

Protecting your hearing (AVLS*)

To use AVLS, tap to change the icon to

* The AVLS (Automatic Volume Limiter System) function keeps down the maximum volume to protect your ears.

Viewing information

•

ALBUM: Shows album information such as format, title, total playback time, and number of tracks in the album.

•

Card: On the Select Album screen, tap

to select the card. The screen shows the information for the selected card such as the type of media, available space/total capacity, and the album list.

•

Track: Shows the title, artist, album, genre, total playback time, format, and playback limitation setting of the selected audio file. File format for audio files encoded in VBR (Variable Bit Rate) is indicated 0 kbps.

•

VIEW*: Shows time. The display changes every time you tap VIEW in the following order:

-	In Continue mode: running time of a track --> remaining playback time of a track --> running time of an album --> remaining playback time of an album --> running time of a track
-	In Shuffle/Reverse mode: running time of a track --> remaining playback time of a track --> running time of a track.
-	In Program Play mode: Played time of a track --> remaining playback time of a track --> running time of a program --> remaining playback time of a program --> running time of a track.

The time indication for album is not displayed when the Program Play is on. The time indication for program is not displayed when the Program Play is off.

* Running time and remaining playback time of an album will not be displayed during Shuffle Play or Reverse Play mode.

Playing in various modes

Playing from the desired point

On the playback control slider

, tap and drag with your stylus to the point where you want the playback to start. Or, tap the desired point where you want to playback to start.
In play mode, the playback starts from the selected point. Tap the desired point where you want to playback to start. In stop mode, the playback starts from the selected point when you tap Play.

Playing tracks repeatedly

Tap the Repeat button to select the desired repeat playback item. The indication changes as you tap.

•	REP OFF: normal playback
•	REP ALL: repeats all tracks
•	REP 1: repeats current playback track

You can use the Repeat playback function during Shuffle, Reverse, or Program Play

For example, when you set Shuffle play to On when REP ALL is selected, all tracks are played repeatedly in random order.

Repeating a specific part of a song (A-B repeat function)

You can choose to play a specific part of a song repeatedly.

1	During playback, tap at the repeat starting point. The icon changes to .
2	Tap at the repeat end point. The icon changes to , and repeat playback starts between the specified points.

To cancel the A-B repeat function

Tap

to change the icon to

Playing tracks in random/reverse order

Tap the playback mode icon to select the desired playback item.

Each time you tap the playback mode icon, the playback mode changes.

•	Continue: normal playback
•	Shuffle: plays in random order
•	Reverse: plays in reverse order
•	Program Play: plays in order specified on the programmed Playlist.

Notes

•	When you tap REVERSE, the playback sound is interrupted for a moment. This is not a malfunction.
•	Playback stops when you switch playback mode from Reverse to Program Play, or Program Play to Continue.
•	When you switch playback mode to Program Play, it may take a while for the playback to start.
•	AB repeat function is deactivated when you tap or . You cannot fast forward or rewind during playback using the AB repeat function.

Selecting playback order of the audio files (Program Play)

You can select to play the audio files in the order that you want.

Tap

The Edit Playlist screen appears.

Note

The Edit Playlist screen will not appear when “Memory Stick™ ” media is write-protected. Release the LOCK prior to the operation.

Make your settings in the Edit Playlist screen.

To select the audio files:

•	Tap on the check box to select audio files that you want to play.
•	Tap Select All to select all audio files.
•	Tap Clear All to clear the check box of selected audio files.
•	Tap Invert to deselect the previously selected audio files and select those that were not selected.

To sort the order of the audio files by the list heading such as Title:

•	Tap the title and drag with your stylus to move an audio file to the desired place on the list.
•	Tap to switch the playback order with an audio file listed above.
•	Tap to switch the playback order with an audio file listed below.

Note

The order of the audio files changed by the above operations becomes invalid when you perform sorting.

To sort the order of the audio files:

•	Tap Title to list the audio files in order of title. Tap again to show the reverse order.
•	Tap Time, Artist, or Album to list in the order of each item. Tap again to show the reverse order.

To sort the order of the audio files to the default order :

Tap Default.

Tap OK.
Playback stops and the playback mode is set to Program Play.
This may take time depending on the number of tracks you have selected. Do not remove the “Memory Stick™ ” media until the writing is complete.

Tap Play

The Program Play starts.

Tips

•	The playback order that you have selected is stored as a “Playlist” in PALM/PROGRAM/MSAUDIO folder of a “Memory Stick™ ” media or Internal Media. The Playlist is effective after the “Memory Stick™ ” media has been ejected.
•	If an audio file in the Playlist does not exist on the “Memory Stick™ ” media or Internal Media, File not found screen appears.
•	If an audio file in the Playlist does not exist on the “Memory Stick™ ” media or Internal Media, the Audio Player skips that file and plays the next existing audio file.
•	Playlist is a format for the Audio Player application. It is not compatible with other audio playback software.

Switching the display

You can select and switch the display between Normal view and List view.

•	Normal view: Displays the title and artist name of the currently playing audio file, the number of the audio files recorded on a “Memory Stick™ ” media, and playback controls.
•	List view: Displays a title, an artist name, and the number of audio files stored in the “(MagicGate) Memory Stick™ ” media. Playback controls are also displayed. You can tap to select and play audio files. You can change the displayed items by tapping . icon is indicated when you select an audio file by tapping on the title or . List view

To change the view, tap the icon in the Audio Player.

•	To change to the Normal view, tap (normal).
•	To change to the List view, tap (list).

Locking the controls

Slide the HOLD switch of your CLIÉ™ handheld to HOLD.

The screen display turns off even during an operation, and none of the controls on your CLIÉ™ handheld will operate.

To check whether your CLIÉ™ handheld is playing audio files while the HOLD switch of your CLIÉ™ handheld is set to HOLD

Check the “Memory Stick” indicator of your CLIÉ™ handheld. If the indicator is flashing, your CLIÉ™ handheld is in playback mode.

Note

The indicator does not flash during playback of audio files stored on the Internal Media.

Switching the album (Custom album)

MP3 audio files and ATRAC3 audio files in the “MagicGate Memory Stick™ ” media, and MP3 audio files in the Internal Media are separately managed as the custom album. In the default setting, if you insert the “MagicGate Memory Stick™ ” media that stores both MP3 and ATRAC3-format audio files and start the Audio Player application, only the ATRAC3-format audio files are displayed and played.
In this case, you can switch the album from ATRAC3-format to MP3-format by following the steps below.

1	Tap Menu , Tools, then Select Album. The Select Album screen appears. Tip You can also select media by tapping at the upper-right corner of the AudioPlayer screen.
2	Tap the arrow , and then select Memory Stick. The information of the albums stored on the “Memory Stick™ ” media appears.
3	Select the album marked with MP3.
4	Tap OK. The playback album is switched to the MP3 custom album. The next time you start playback, MP3-format audio files stored in the “MagicGate Memory Stick™ ” media are played.

To play the ATRAC3-format audio files

In step 3 above, select the album marked with ATRAC3.

To play MP3-format audio files stored on the Internal Media

In step 2 above, select Internal Media.